dépressiometre fabrication perso
Posté : 01 nov. 2012, 10:22
[img width=338 height=600]http://nsa31.casimages.com/img/2012/11/01/121101095434834956.jpg[/img]
tout d'abord prendre une tôle patinée, la plier pour la rendre plus rigide, puis la percer.
[img width=800 height=450]http://nsa32.casimages.com/img/2012/11/01/12110109581698080.jpg[/img]
réunir le matériel necessaire
[img width=800 height=450]http://nsa31.casimages.com/img/2012/11/01/121101100103409366.jpg[/img]
quelques points de brasures
[img width=800 height=450]http://nsa31.casimages.com/img/2012/11/01/121101100249775425.jpg[/img]
on assemble le tout
[img width=800 height=450]http://nsa32.casimages.com/img/2012/11/01/121101100457887240.jpg[/img]
[img width=338 height=600]http://nsa31.casimages.com/img/2012/11/01/12110110061710963.jpg[/img]
on monte les vaccuometres glycérine
[img width=800 height=450]http://nsa31.casimages.com/img/2012/11/01/121101100800432368.jpg[/img]
un peu de tuyau pour evac de clim et hop le tours est joué
[img width=800 height=450]http://nsa32.casimages.com/img/2012/11/01/12110110102284626.jpg[/img]
tout d'abord prendre une tôle patinée, la plier pour la rendre plus rigide, puis la percer.
[img width=800 height=450]http://nsa32.casimages.com/img/2012/11/01/12110109581698080.jpg[/img]
réunir le matériel necessaire
[img width=800 height=450]http://nsa31.casimages.com/img/2012/11/01/121101100103409366.jpg[/img]
quelques points de brasures
[img width=800 height=450]http://nsa31.casimages.com/img/2012/11/01/121101100249775425.jpg[/img]
on assemble le tout
[img width=800 height=450]http://nsa32.casimages.com/img/2012/11/01/121101100457887240.jpg[/img]
[img width=338 height=600]http://nsa31.casimages.com/img/2012/11/01/12110110061710963.jpg[/img]
on monte les vaccuometres glycérine
[img width=800 height=450]http://nsa31.casimages.com/img/2012/11/01/121101100800432368.jpg[/img]
un peu de tuyau pour evac de clim et hop le tours est joué
[img width=800 height=450]http://nsa32.casimages.com/img/2012/11/01/12110110102284626.jpg[/img]